Turbine flow meter can be used to measure the non corrosive single medium of low flow rate, pure, free of any impurities, low viscosity. For example, pure water, high pure water, super pure water, Methanol, ethanol, toluene, ethylbenzene, No. 0 diesel oil, edible oil.
|
Parameters
|
Execution standard |
Turbine flow sensor "JB/T9246-1999" |
|
Connection method |
Thread connection, flange connection,clamp-on, etc. |
|
Accuracy class |
1.0, 0.5, 0.2 (special) |
|
Range ratio |
1:10, 1:15, 1:20 |
|
Sensor material |
304 stainless steel, 316 (L) stainless steel, etc. |
|
Conditions of use Medium |
Temperature: -20 ° C ~ +120 ° C Ambient temperature: -20 ° C ~ +60 ° C |
|
Relative humidity |
: 5% to 90% |
|
Atmospheric pressure: |
86KPa to 106 KPa |
|
Signal output function |
Pulse signal, 4~20mA current output |
|
Communication output function |
RS485 communication, HART protocol, etc. |
|
Power supply |
24VDC power supply (two-wire system), 12 to 24VDC (three-wire system), battery power supply |
|
Protection level |
IP65 or higher (requires customization) |
|
Transmission distance |
1Km |
Calibration is the most important parts of manufacturing the high accuracy flowmeter,As the principle is the same,the material and the structure design of the flowmeter is not much different.High accuracy flowmeters depends on the high accuracy calibration equipment.
We have carton packing and wooden case packing, before packing, we will make the goods clean. We'll use screws and wire to secure. According to the size of goods to arrange shipment. Will make sure all the goods to your place safely. Here is the weight and dimension table for some flow meters as below.
Kaifeng Fantai Measurement & Control Technology Co., Ltd. was established in 2008, which is located in Kaifeng, Henan Province,. It is a professional manufacturer of electromagnetic flowmeter, vortex flowmeter, turbine flowmeter and orifice flowmeter.
Our factory covers more than 10000 square meters. It owns 4 patents for product appearance and 8 patents for practical patents. The company has one set standard metrological equipment for calibration with Sartorius scale. Two sets standard flowmeter calibration equipment.
We have CE, ISO, explosion-proof certificates. The company has a strong after-sales team with 15 engineers to ensure that customer site issues are resolved within 24 hours.
Our philosophy is: customer's success is our achievement! A good product is to let customers have no worries!
1. Who are we?
We are the manufacturer of flow meter in Henan, China, start from 2014. There are total about 51-100 people in our office.
2. How can we guarantee quality?
