Electromagnetic flow meters, or magmeters, are comprised of a transmitter and sensor that together to measure flow. The magnetic flow meter’s sensor is placed inline and measures an induced voltage generated by the fluid as it flows through a pipe. The transmitter takes the voltage generated by the sensor, converts the voltage into a flow measurement and transmits that flow measurement to a control system.
|
|
Model |
DN6~DN3000mm |
||
|
Nominal Pressure |
0.6~1.6MPa(2.5Mpa/4.0Mpa/6.4Mpa...42Mpa) |
||
|
Accuracy |
±0.5%,±0.3%or±0.2% are available |
||
|
Liner material |
Teflon,PFA,F46,Neoprene,Polyurethane |
||
|
Electrode Type |
General type |
||
|
Electrode material |
Stainless steel SUS316,Hastelloy B, Hastelloy C,Titanium,Tantalum Platinum-iridium, |
||
|
Mediem temperature |
Integral type |
-20°C~+60°C |
|
|
Remote type |
Neoprene & Polyurethane Liner |
-10°C~+80°C |
|
|
PTFE Liner /PFA Liner /F46 Liner |
-10°C~+160°C |
||
|
Ambient Temperature |
-25°C ~+ 60°C |
||
|
Ambient Humidity |
5~100%RH(relative humidity) |
||
|
Medium Electrical |
≥5μ s/cm |
||
|
Measuring Range |
1500:1,flow rate<15m/s |
||
|
Structure type |
Integral type,remote type,submersible type,ex-proof type |
||
|
Protection Class |
IP65,IP68(optional) |
||
|
Ex-proof Mark |
ExmdⅡT6 |
||
|
Product Standard |
JB/T 9248-1999 Electormagnetic Flowmeter |
||
1, pipe cutting 2, welding flange 3, coil assemble 4, polishing 5,sensor checking 6, paiting 7 transmitter checking 8.qualified products
Calibration is the most important parts of manufacturing the high accuracy flowmeter,As the principle is the same,the material and the structure design of the flowmeter is not much different.High accuracy flowmeters depends on the high accuracy calibration equipment.
1.How do you calibrate the flowmeter?
We use the reference standard flowmeter method to calibrate the 0.5%R flowmeters.We use the Gravimetric for the 0.2% R flowmeters.
2.How can you gurantee the high accuracy?
The Gravimetric mothod is much more accurate than the volumetric calibration and we use the high accuracy sidorious scale to gurantee the less tolerance.
3.How many years do you use the calibration ?
we use it since our factory started at 2008
4.Why does the calibration influence the accuracy?is important?
The material and the structure of the magnetic flowmeter are not much difference,and the accuracy depends what it reference.Our high accuracy Sartorius scale can reach the 0.01%.so it is no problem to gurantee the 0.2% accuracy.
5.Do you need agent?
Yes,we need agent to expand our sales,we provide technical support,Products priority and good price.
6.I am a small company,Can I be your agent?
We are a developing company ,we Appreciate partners who is willing to grow with us
You minght be a common customer to a large scaled company or famous brand,but for us ,you are the most important and we will put you to the first.
We gurantee that the quality of the oversea sales products are much better than domestic model.
Please place an trial order to try our service and you will like it !!
We can accept the order with trade assurance on Alibaba to protect your quality,shipment,and payment.
